PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of bright yellow PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Filament for 3D printing PETG of the Polish manufacturer 3DKordo in black matte. The modified polymer composition allows you to achieve a beautiful matte finish of the printed element.

PETG filament is a thermoplastic polymer from a group of polyesters in a utility version, intended for 3D printing using the FFF method. PETG filament, also known as polyethene terephthalate, is a copolyester known for its conductivity and ease of use. PETG filament has the stiffness and mechanical properties of ABS filament but is as easy to print as PLA filament.
The filament for printing PETG from the manufacturer 3DKordo is wound on a spool, it appeared in a vacuum.

INNOVATEFIL® PP SUPPORT, is a support material for PP that is unique in the market, knowing that it is a highly requested need for all PP users and that it will facilitate the production of complex parts, especially in the industrial sector which is constantly on the lookout for cutting-edge products and in need of an efficiency and effectiveness boost in their production and factory lines.

One of the numerous advantages of INNOVATEFIL® PP SUPPORT is how simple it is to use. This is because INNOVATEFIL® PP SUPPORT is a BREAKAWAY material, which makes it very simple to remove it from the finished product and eliminates the need for any form of dilution. This, in addition to producing a flawless finish in a shorter amount of time, represents a significant reduction in post-processing work and efficiency never previously attained by any material in the industry.

Tarfuse® filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

The Tarfuse PA6 filament is characterized by very good mechanical strength, flexibility and excellent adhesion of individual layers. Tarfuse PA6 is a filament dedicated to printing functional and technical parts in such industries as automotive, mechanical engineering, railways, construction industry, and electrical engineering.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum-packed with a moisture absorber. The spool contains 5 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is a material friendly for beginners, the material is available in covering and transparent colours.

Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Recommended printing temperature 220-250 °C

Heated bed temperature - 70-80°C

You can print at 90mm/s. 

Dimensions of the spool:

- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm. 

The highest quality filament for 3D printing Everfil Nylon PA12-CF was made by a Polish manufacturer, 3D Kordo. Everfil PA12-CF is a carbon fibre-reinforced PA12 (Nylon 12) filament. Thanks to the low moisture sensitivity of PA12, this product features outstanding mechanical and thermal properties it is ideal to create manufacturing tools.

Innovatefil PP-CF by Spanish manufacturer, Smart Materials 3D is a polypropylene-based filament reinforced with a high carbon fibre load, which considerably improves the final piece's dimensional stability, achieving very good quality finishes. Furthermore, thanks to incorporating these fibres, we obtain a stiffer material than standard PP, but with enough flexibility to provide high-impact, mechanical and thermal resistance.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
The SILK 3D printing filament by recognized Polish manufacturer, Devil Design, is an ideal filament for arts and crafts projects, vases and other 3D printed products that can have unique silky properties.
SILK filament is an easy-to-print, non-clogging, natural and non-toxic material for 3D printing. The use of SILK filament is harmless to the user and the environment. SILK filament is ideal for indoor use.