Polymaker PolyLite PLA filament 1,75 mm, purple, 1 kg
Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.
Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!
Shipment date:: 24 hours
Spectrum PETG FR V0 filament 1,75 mm NATURAL 0,75kg
Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.
Shipment date:: 24 hours
Polymaker PolyMax PLA filament 1,75 mm, orange, spool 0,75 kg
Polymaker PolyMax PLA is a 3D printing material with excellent mechanical properties and printing quality. Polymaker PolyMax PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.
Regular PLA is a very brittle material, which greatly limits its range of applications. Polymaker PolyMax PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, so if you are looking for a material that can withstand your mechanically demanding tasks, Polymaker PolyMax PLA is ideal.
Shipment date:: 24 hours
Polymaker PolyLite PLA filament 1,75 mm, Dark Gray Green, 1 kg
Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.
Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, copper, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Devil Design PLA filament 1,75 mm, dark violet, 1 kg
PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark violet PLA filament.
PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, blue, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Filament Spectrum PLA High Speed 1.75mm DEEP BLACK 1kg
Spectrum Premium PLA High-Speed filament is designed for fast 3D printing at speeds of up to 800mm/s, allowing for the creation of highly precise models in significantly shorter times. This filament has been optimized for high-speed 3D printing technology, ensuring high flowability, rapid cooling and precise reproduction of details.
The enhanced mechanical properties of Premium PLA High Speed, surpassing standard PLA, are particularly important when printing at high speeds. The material stands out for its increased impact resistance and excellent layer adhesion. Premium PLA High Speed also boasts exceptional performance and quality, making it ideal for many applications, including rapid prototyping and conceptual modelling.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, galaxy (sparkly) black, 0,33 kg
Sparkly black PETG 3D printing filament 1.75 mm by a recognized Polish manufacturer Devil Design contains a sparkling addition that makes the starry sky effect.
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Recommended printing temperature 220-250 °C
Heated bed temperature - 70-80°C
You can print at 90mm/s.
Dimensions of the spool:
- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm.
Shipment date:: 24 hours