Devil Design PETG filament 1,75 mm, copper, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Marwiol PLA filament 1,75 mm, red, spool 1 kg
PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.
3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of red PLA filament 1,75 mm.
Shipment date:: 24 hours
Smartfil EP: machinable PLA filament 2,85 mm, white, 0,75 kg
This filament is a modified PLA to make it machinable and obtain a completely smooth surface finish. Sanding it with sandpaper together with water leaves a similar finish to ceramic. It can also be painted with any kind of paint. It is recommended for architecture, odontology, restoration, models, imitations of sculptures, etc…
Shipment date:: 24 hours
Smarfil PLA filament 1,75 mm, sunset, 1 kg
Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. PLA filament is biodegradable and compostable material obtained through the starch extracted from corn, beet, or sugar cane. PLA filament is the material most used in the 3D printing industry. It was designed to be easy to print and it is suitable for most of the printers in the market. Smarfil PLA filament during use does not generate harmful gases, so it is perfect for printing in inner spaces or with poor ventilation.
Shipment date:: 24 hours
PET-G filament, 1,75 mm, froggy gold, spool 0,5 kg
The PETG material is essentially the same as the known PET material from which PET bottles are made. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET so that it’s easier to print and less brittle. It is a strong and tough material, which is characterized by good thermal stability. Thanks to the small shrinkage during printing, it is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and bears the printing properties of PLA.
Shipment date:: 24 hours
Devil Design PETG filament 1,75 mm, light brown, 1 kg
PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. This material, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.
Shipment date:: 24 hours
Devil Design PLA filament 1,75 mm, pink, 0,33 kg
PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of pink PLA filament.
PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.
Shipment date:: 24 hours
Devil Design - spray anti-warping 110 ml
Devil Design spray is an adhesive in a pump spray bottle based on thermoplastic copolymers for 3D printing. 3DLac Plus is ultrafast drying, simple application, easy to clean with water, and a good adhesive for ABS, PLA, PETG, and other 3D printing filaments.
Shipment date:: 24 hours
Devil Design ABS+ filament 1,75 mm, black, 2 kg
Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.
Shipment date:: 24 hours