3DLAC is an excellent spray-on bed adhesive that works well with adhering ABS, and PLA to the glass build plate without any peeling or curling off the glass while printing. It is very easy to apply and requires no preparation before printing unlike using tape. Simply spray on your glass build plate and you are ready to print within seconds!

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of copper PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Spectrum PETG Premium High Speed filament is a material designed for high-speed 3D printing. It combines the excellent mechanical properties of PETG with the ability to print at speeds up to 800 mm/s. The material has been optimised specifically for high-speed 3D printing, ensuring the perfect balance between speed and detail quality.

Spectrum PETG Premium High Speed is resistant to mechanical and chemical factors, making it suitable for the production of functional components that must withstand heavy loads or harsh operating conditions. The filament allows for the printing of larger models without fear of deformation, while maintaining high transparency in transparent shades, making it an excellent choice for aesthetic and functional applications.

Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, green, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Smartfil Cork PLA filament is a biodegradable and compostable 3D printing material of high quality, obtained from a polymer matrix and a load from the reuse of organic materials, in this case, cork. The pieces printed with this material are characterized by having a very soft, matt, and pleasant-to-the-touch finish. This filament has a dark tone that differentiates it from other sustainable filaments.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Filament produced on request marwiol by Polish manufacturer 3D Kordo.

Filament PETG - a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open-source structures before use. PETG is material friendly for beginners, the material is available in covering and transparent colours.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.