Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, blue, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

INNOVATEFIL® PP SUPPORT, is a support material for PP that is unique in the market, knowing that it is a highly requested need for all PP users and that it will facilitate the production of complex parts, especially in the industrial sector which is constantly on the lookout for cutting-edge products and in need of an efficiency and effectiveness boost in their production and factory lines.

One of the numerous advantages of INNOVATEFIL® PP SUPPORT is how simple it is to use. This is because INNOVATEFIL® PP SUPPORT is a BREAKAWAY material, which makes it very simple to remove it from the finished product and eliminates the need for any form of dilution. This, in addition to producing a flawless finish in a shorter amount of time, represents a significant reduction in post-processing work and efficiency never previously attained by any material in the industry.

Everfil Silk 3D printing filament is made by a Polish manufacturer 3DKordo. It is made of PLA with dye concentrates giving the effect of a satin structure. It is an element with functional properties, attractive to 3D printing enthusiasts looking for other alternative design solutions. The satin structure of print layers limits the visibility of layers on the surface of manufactured elements. Filament with a high gloss surface. Suitable for FFF/FDM applications from thin and complex parts to thicker cross-sections. It is one of the most popular fibres in the 3D printing market due to its appearance in printing, low melting point and the possibility of smooth and accurate prints.

ASA (Acrylonitrile Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA.  ASA's UV stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather.  ASA's exceptional mechanical and thermal properties - coupled with excellent UV stability - is why this resin is used in the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings. 

Polymaker PolyLite PLA filament 1,75 mm, that changes colour from green to lime under the influence of temperature. Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Spectrum Premium PLA High-Speed filament is designed for fast 3D printing at speeds of up to 800mm/s, allowing for the creation of highly precise models in significantly shorter times. This filament has been optimized for high-speed 3D printing technology, ensuring high flowability, rapid cooling and precise reproduction of details.
The enhanced mechanical properties of Premium PLA High Speed, surpassing standard PLA, are particularly important when printing at high speeds. The material stands out for its increased impact resistance and excellent layer adhesion. Premium PLA High Speed also boasts exceptional performance and quality, making it ideal for many applications, including rapid prototyping and conceptual modelling.

The Sample Box 3 contains 2×100g sample: PolyMide™ PA6-CF and PolyMide™ PA6-GF. These samples require a 3D printer capable of reaching a nozzle temperature of 300˚C and equipped with an abrasion resistant nozzle

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of grey PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of red PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.