The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

Rinse in water:
- print thin walls and heep filling rate as low as possible to shorten the time for rinsing
- gently rinse with water, hot water and patience provides good results
- you can clearly notice the effect and that the material is getting softer after one day
- after three days every PVA should be gone
- stir and change the water often
- you can reduce the rinsing time by using an ultrasonic cleaner
- remaining water can be removed from the object quickly by using a clothes dryer
- repeatedly rinsing: fresh water → Wait → Dryer → fresh water → Wait → Dryer
- PVA residues feel greasy, like sugar syrup
- remove all PVA residues

Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material. 

Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dried in an oven at about 80 ° C for four to five hours. We recommend drying the filament before the very first print.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

The Devil Design StartPack Silk 1.75 mm is a set of 3D printing filaments ABS 1.75 mm from a recognized Polish manufacturer, Devil Design, contains 6 spools of 0.33 kg each of 3D printing filament in the following colours: white, bright yellow, silver, pink, blue and bronze.

SILK filament was created from a combination of PLA and PET-G materials, to have a very smooth and silky surface finish with a high level of light dispersion and reflection. Silk filament exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layersDevil.

DesignStartPack Silk is the perfect option to start your 3D printing adventure.

PLA filament was produced on request by marwiol.com by Polish manufacturer 3D Kordo. Our 3D printing filament combines high quality at an affordable price.

3D printing filament wound on a spool and vacuum packed. The spool contains 1 kg of brown PLA filament 1,75 mm.

Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.

Spectrum PETG Premium is made by a Polish manufacturer Spectrum Filaments. It is the second most popular material for desktop 3D printing. A major advantage provided by Spectrum PETG Premium is the virtually zero shrinkage rate and low absorption of moisture as compared to other thermoplastics used for FDM/FFF 3D printing. Items manufactured with PETG maintain stable properties over a long life. Spectrum PETG Premium combines the advantages of PLA and ABS. It also provides nearly trouble-free printing and exceptional adhesion between layers.

Polymaker PolyLite PLA is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology that ensures consistent extrusion and prevents jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

Smart Glace: Filament that combines the best of other materials. Very easy to print without warping. Its mechanical properties are similar to ABS, its resistance to impact is higher. Its best feature, it can have a chemist polish with alcohol, which allows us to achieve a completely smooth surface finish and increase the strength of the piece to obtain a greater adhesion in between layers. By polishing with alcohol in thin profiles, we can get pieces of high transparency, managing to simulate crystal.

Spectrum PET-G Glow in the Dark is a PET-G-based filament blended with a concentrated phosphorescent pigment which causes the phosphorescence effect. Accordingly, they will emit their light once the printed items are exposed to an external light source. The material has all the typical characteristics of the pure PET-G. The added pigment has a neutral impact on the material’s properties