- ABS 1,75 mm(25)
- ABS 2,85 mm(17)
- PLA 1,75 mm(99)
- PLA 1,75 mm matt(11)
- PLA 2,85 mm(15)
- PET-G 1,75 mm(71)
- PET-G 2,85 mm(6)
- SILK(16)
- ASA 1,75 mm(10)
- Rubber (TPU) 1,75 mm(51)
- Rubber (TPU) 2,85 mm(9)
- HIPS 1,75 mm(7)
- HIPS 2,85 mm(6)
- PVA(2)
- PolyMax PLA 1,75 mm(4)
- PolyMax PLA 2,85 mm(9)
- PolyTerra PLA(11)
- PolyMax PET(3)
- PolyFlex 90A 1,75 mm(4)
- PolyFlex 95A 1,75 mm(9)
- PolyFlex 95A 2,85 mm(1)
- PolyPlus / PolyLite PLA 1,75 mm(8)
- PolyPlus PLA 2,85 mm(9)
- PolyWood(3)
- Technical Filaments(28)
- PC (Polycarbon.) 1,75 mm(6)
- PC (Polycarbon.) 2,85 mm(3)
- PP (Polypropylen)(3)
- Supporting filaments(12)
- PMMA(3)
- Filaments with wood fibres(12)
- Filaments imitating marble(5)
- PoroLay(9)
- MoldLay(3)
- Nylon(11)
- Filament for 3D pen(4)
- Accessories(10)
- Resins(5)
- Sale(7)
- News link
- Promotions link
ABS-T filament 2,85 mm, pearly with glitter, spool 1 kg
PolySupport filament 1,75 mm , spool 0,5 kg
PLA Philament Gypsum 1,75 mm, spool 0,75 kg
LayBrick filament 2,85 mm 0,25 kg (two coils: 0,20 kg + 0,05 kg)
LayWoo-d3 Flex filament 2,85 mm 0,25 kg
LayBrick filament 2,85 mm 0,25 kg
PLA PolyPlus filament 2,85 mm, black, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, purple, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, gray, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, yellow, spool 0,75 kg
ABS-T filament 2,85 mm, sparkly blue, spool 1 kg
PLA PolyPlus filament 2,85 mm, orange, spool 0,75 kg
PET filament 1,75 mm, black, spool 1 kg
€16.25
€13.21
PLA filament 1,75 mm, white, spool 5 kg
Shipment date::
24 hours
Producer:
Description
Filament produced in Poland
There is practically no shrinkage (no warp effect).
The softening temperature is at approx. 45 °C.
PLA is a hard material that is bendable like ABS.
This Poly Lactic Acid is not brittle or fragile and convinces by its high hardiness and stiffness.
Dimensions of the spool:
- Diameter: 30 cm,
- Height: 10 cm,
- Hole diameter: 5 cm.
Recommended printing temperature 190-210 °C