- ABS 1,75 mm(23)
- ABS 2,85 mm(17)
- PLA 1,75 mm(101)
- PLA 1,75 mm matt(12)
- PLA 2,85 mm(13)
- PET-G 1,75 mm(65)
- PET-G 2,85 mm(8)
- SILK(16)
- ASA 1,75 mm(10)
- Rubber (TPU) 1,75 mm(50)
- Rubber (TPU) 2,85 mm(8)
- HIPS 1,75 mm(6)
- HIPS 2,85 mm(6)
- PVA(1)
- PolyMax PLA 1,75 mm(4)
- PolyMax PLA 2,85 mm(8)
- PolyTerra PLA(12)
- PolyMax PET(3)
- PolyFlex 90A 1,75 mm(4)
- PolyFlex 95A 1,75 mm(8)
- PolyPlus / PolyLite PLA 1,75 mm(8)
- PolyPlus PLA 2,85 mm(8)
- PolyWood(3)
- Technical Filaments(25)
- PC (Polycarbon.) 1,75 mm(7)
- PC (Polycarbon.) 2,85 mm(3)
- PP (Polypropylen)(3)
- Supporting filaments(11)
- PMMA(2)
- Filaments with wood fibres(12)
- Filaments imitating marble(5)
- PoroLay(9)
- MoldLay(3)
- Nylon(8)
- Filament for 3D pen(4)
- Accessories(9)
- Resins(5)
- Sale(7)
- News link
- Promotions link
PLA Philament Gypsum 1,75 mm, spool 0,75 kg
LayBrick filament 2,85 mm 0,25 kg (two coils: 0,20 kg + 0,05 kg)
LayWoo-d3 Flex filament 2,85 mm 0,25 kg
LayBrick filament 2,85 mm 0,25 kg
PLA PolyPlus filament 2,85 mm, black, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, purple, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, gray, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, yellow, spool 0,75 kg
PolySupport filament 1,75 mm , spool 0,5 kg
PLA PolyPlus filament 2,85 mm, blue, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, natural, spool 0,75 kg
PLA PolyPlus filament 2,85 mm, translucent yellow, spool 0,75 kg
PET-G filament 1,75 mm, black, spool 1 kg
€16.25
€13.21
PLA filament 1,75 mm, orange, spool 1 kg
Shipment date::
24 hours
Producer:
Description
Filament PLA - thermoplastic polyester in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.
Filament produced in Poland.
Suggested printing parameters:
Hotend 200-235°C
Heated bed 50-60°C
Cooling the printout Recommended