Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.
Recommended printing temperature 220-250 °C
Heated bed temperature - 70-80°C
You can print at 90mm/s. Similar to print with PLA
Dimensions of the spool:
- Diameter: 20,0 cm,
- Height: 7,0 cm,
- Hole diameter: 5,2 cm.