


HIPS filament, green, 2,85 mm 0,75 kg
Regular price:
Regular price:
product unavailable

Description
HIPS (High Impact Polystrene) Filament is designed to dissolvable easily in a limonene bath in just 8-24 hours (depending on size and geometry of print). Limonene is a common, colorless, citrus-scented solvent available online and in grocery or home stores.
Our HIPS filament can be extruded at 200-260 degrees C making it easy to print using normal ABS settings on the UP and Makerbot printers.
HIPS is compatible with ABS for dual extrusion (ie HIPS and ABS bond during printing) allowing for HIPS support and RAFT printing on ABS models, for easy dissolving away after printing.
Note:HIPS requires a heated build plate and PLA will not stick to this. For dual extruding with PLA see PVA support material.
Nominal diameter |
2.85 mm |
|
Material |
High Impact Polystyrene |
|
Colour |
green |
|
Length |
> 110 meter |
|
Weight |
approx. 750 g (without blank spool) |
|
Dimension (reel) |
outer Ø ~ 200 mm, width ~ 55 mm |