Technical filaments

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

Spectrum PET-G Carbon is a modified, PETG-based filament blended with carbon fibres which contributes to a considerably higher rigidity, hardness and tensile resistance while retaining low shrinkage and very good adhesion to build platforms typical for pure PETG. The 10% addition of carbon fibres enables to obtaining of matte surfaces of printed items, which greatly improves the aesthetic properties of printed items.

Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.

Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.

MoldLay filament is a wax material for 3D printing, designed to create casting moulds for castings using the lost wax method. The printing process of MoldLay filament is similar to PLA filament (printing temperature up to 170-180°C). The difference with the standard 3D printing filaments appears after heating the printed form to a temperature of 270°C. At this temperature, MoldLay transforms into a low-viscosity fluid, allowing easy mould removal of the casting mould.