Featured products

Tarfuse® PLA filament is a brand of 3D printing filaments of Grupa Azoty S.A., the largest chemical company in Poland.

Tarfuse PLA filament is an easy-to-use 3D printing filament compared to other types of materials. The PLA with glitter filament gets a unique and shiny finish in your pieces. PLA filament can be printed using low to moderate temperatures and higher print speeds in FDM technology. Mechanical parameters as well as other properties of the printed model largely depend on the 3D printing conditions, such as printing temperature, extrusion speed, cooling system, etc. Compared to other 3D printing materials, the Tarfuse PLA filament shows low shrinkage and thus much lower susceptibility to warping therefore it is possible to print without a special cooling system.

PLA 3D printing filament by a recognized Polish manufacturer, Devil Design. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of dark violet PLA filament.

PLA filament is the most popular 3D printing material. PLA owes its popularity primarily to the ease of printing. The relatively low range of printing temperatures, as well as the fact that PLA filament does not require a heated table and a shielded chamber, means that this material can be used in the simplest 3D printers.

Prografen PLA Graphene Strong is a high-quality polymer 3D printer filament created from renewable materials. This filament was developed in response to market demand for a professional material that would unleash the full potential of the latest generation of 3D printers. PLA with the addition of graphene allows for the production of precise details at ultra-high printing speeds without issues with voids or stringing. This is possible due to its high MFR and extremely low shrinkage. The components of the filament are poly(lactic acid) and a 6% allowance of EFG (Edge Functionalized Graphene) flake graphene. In addition, the material does not require special nozzles or climate chambers. Graphene doping also increases the stiffness of the material by over 15% compared to pure polymer.

Spectrum PETG FR V0 is a new halogen-free, flame-resistant 3D printing material based on the ever-popular PETG. The filament is designed according to UL 94 V0* flammability rating requirements, meaning that the vertical burning of the filament or printed part does not exceed 10 seconds. Most typical plastics have poor flame resistance, which is why the Spectrum PETG FR V0 filament was developed with flame-resistant or self-extinguishing properties to provide a high level of safety in everyday or working environments. The applied modifications do not affect the printability of the filament, which helps maintain the classic properties of PETG, i.e. simplicity and efficiency of printing, with very low shrinkage and relatively high tensile strength.

PETG filament is a thermoplastic polymer from a group of polyesters in the form of fibre, used for 3D printing using the FFF method. PETG filament, also known as Polyethylene Terephthalate Glycol, is a co-polyester known for its durability and ease of use. Filament PETG has the rigidity and mechanical properties of ABS but is still easy to print like PLA.
PETG printing filament by Polish-recognized manufacturer, Devil Design is wound on a spool, vacuum packed with a moisture absorber. This PETG filament can be used in all FFF printers that are not protected from external suppliers.

Filament for 3D printing ABS+ by recognized Polish manufacturer, Devil Design. ABS filament is a material for 3D printing with high hardness, and resistance to cracks and scratches. The ABS+ filament by Devil Design contains an additive that reduces the shrinkage of the material during cooling down. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected against third-party material and open-source designs. ABS+ is easily subjected to mechanical processing such as grinding or drilling. The ABS+ filament is soluble in Acetone.

Smarfil PLA is a high-quality PLA filament by Spanish manufacturer Smart Materials 3D. The Smartfil PLA Skin range is a series of PLA filaments with skin colour tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modelling and prototyping to achieve the most precise skin hue possible.

Polymaker PolyLite PLA contains with increased quantity an additive thanks to which the printed element glows with its own, in this case, yellow, light after prior exposure to light from the outside. Polymaker PolyLite PLA  is a premium PLA 3D printing filament designed for all desktop FDM/FFF 3D printers. It is produced with our patented Jam-Free™ technology, ensuring consistent extrusion and preventing jams.

Patented Jam-Free™ technology dramatically improves the heat stability of Polymaker PLA filaments, by combining the latest developments in biopolymer formulation and advanced polymer processing technologies. As a result, Polymaker PolyLite PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle jams!

PLA filament with glitter particles by a Spanish manufacturer, Smart Materials 3D. PLA filament with glitter gets a unique and shiny finish in your pieces.
This PLA filament minimizes printing layers, achieving a completely homogeneous surface and offers the same benefits as standard PLA filament, so high quality is guaranteed.

Print easily a lot of models with higher printing speed than other materials. You will not have pieces with warping as this material does not have contractions, so you will be able to print with high-resolution models with a good surface finish.