PET-G 1,75 mm

Material FRJet, based on PETG, contains a mixture of special additives with flame retarder. This material, thanks to a small shrinkage during printing, is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and PLA printing properties. The recommended print temperatures are the same as PETG, is 220 - 250 ° C and for the substrate approx. 85 ° C.

The set contains 6 bobbins with different materials (ABS +, ASA, PET-G, TPU, HIPS and PLA) which gives a total of 2 kg of filament (6 × 0.33 kg). All in "natural" colors, undyed.

This is an ideal option to start the adventure with 3D printing.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 0,33 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fibre, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 2 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before use. PET-G is material friendly for beginners, the material is available in covering and transparent colours.

The PETG material is essentially the same as the known PET material from which PET bottles are made. The G in the acronym PETG stands for Glycol which is added during the manufacturing process. Glycol modifies the properties of PET so that it’s easier to print and less brittle. It is a strong and tough material, which is characterized by good thermal stability. Thanks to the small shrinkage during printing, it is suitable for printing large objects. PETG has mechanical and thermal properties better than ABS and bears the printing properties of PLA.